File Path: C:\IOC\dcexpert\StruxureWare Data Center Expert 7.8.0\dcexpert
...
Data Center Enterprise and Storage should be notified of any red alarms that appear in StruxureWare by phone call. Yellow alarms should be monitored for changes, but do not need to be reported (with the exception of door alarms - they should be reported as below, "Routine alarm", and Temperature Alarms (See High Temps or Outage). FIRE alarms warrants an immediate call. Exceptions to when to call are listed below:
...
Launching the Application | |
Via Shortcut | Click on the StruxureWare shortcut on the desktop. |
Manually | Click start, Type StruxureWare, Click on StruxureWare Data Center Expert 7.6.0 |
The log-on information should be saved/auto-populated (The splash screen may have a slightly different appearance): | |
After successfully logging on, the main screen will look like the Screenshot below. |
|
128.210.251.117
Pay attention to the ‘Monitoring’ and ‘Surveillance’ buttons at the top left of the screen, they will be used at the console monitors. Also note the Device Groups and Active Alarms tabs. These will alert the user to equipment problems.
...
Active Alarms will be displayed under the “Active Alarms” tab, and the normal-status green checkmarks next to the devices will change to yellow or red, depending on the nature of the alarm(s).
...
The most important screens within the software to be monitored are the “Device Groups” and “Active Alarms” windows. We are looking for any color other than green , but specifically yellow and/or red in one or both of those windows. Yellow alarms should be monitored for changes, but do not need to be reported (except High Temperature alarms, which should be treated as red alarms).
...