Spaces
Apps
Templates
Create
Birck Nanotechnology Center Wiki
All content
Space settings
Shortcuts
Recharge Rates
Recharge Rates
This trigger is hidden
Equipment Status
Equipment Status
This trigger is hidden
Metallization Sources
Metallization Sources
This trigger is hidden
iLab - Purdue
iLab - Purdue
This trigger is hidden
BNC Help Desk
BNC Help Desk
This trigger is hidden
BNC User Training
BNC User Training
This trigger is hidden
BNC Website
BNC Website
This trigger is hidden
BRK SDS Repository
BRK SDS Repository
This trigger is hidden
Content
Results will update as you type.
Info Pages
Fabrication
Processing
Thermal
Patterning
Etching
Deposition
Atomic Layer Deposition (ALD)
PECVD (Plasma Enhanced Chemical Vapor Deposition)
CVD
Evaporation
•
CHA E-Beam Evaporator #1
•
CHA E-Beam Evaporator #2
Lesker E-Beam Evaporator - Flexible Substrate Compatible
Lesker Kiosk Home Page
•
1. Lesker E-Beam Initial State Check
•
2. Lesker E-Beam Vent Chamber to Atmosphere
•
3. Lesker E-Beam Raise the Bell Jar
•
4. Lesker E-Beam Sample Loading
•
5. Lesker E-Beam Lowering the Bell Jar
•
6. Lesker E-Beam Evacuate to Low Vacuum
•
7. Lesker E-Beam Evacuate to High Vacuum
•
8. Lesker E-Beam Inficon Controller Configuration
•
9. Lesker E-Beam Material Deposition
Leybold E-Beam Evaporator
•
PVD E-Beam Evaporator - Metal/Magnetic Sources
•
PVD E-Beam Evaporator - Glancing Angle Deposition (GLAD)
Sputtering
Other
Electrodeposition
Materials in Vacuum
Back-end
Bio-fabrication
Roll-to-Roll
Other Fabrication
Characterization
Birck Nanotechnology Center Wiki
/
/
Lesker Kiosk Home Page
/
4. Lesker E-Beam Sample Loading
4. Lesker E-Beam Sample Loading
Former user (Deleted)
Owned by
Former user (Deleted)
Last updated:
May 12, 2019
1 min read
Loading data...
Load sample onto block sample holder using clips. Use only blocks inside the chamber.
{"serverDuration": 20, "requestCorrelationId": "16aa533771754826b918b8ad068f165b"}