| Page Properties | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
|
| Page Properties | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
|
| Table of Content Zone | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
Overview
General Description
Chill roll film and sheet casting line floor model.
Specifications
- 25 mm single screw extruder, 30:1 L/D.
- 250 mm at die width.
- Dies have adjustable lips for sheet thickness from 0.3 to 1.5 mm or film thickness down to 0.01 mm.
- Thermal components operate up to 400 ̊C.
- Up to 250 mm width untrimmed film. More typical is about 8" width after trimming
- Chill Rolls are hard chromed, mirror polished and cored for water cooling and heating. Polishing roll is pneumatically operated.
Technology Overview - Remove if multiple tools use the same technology/process
Sample Requirements and Preparation
- Suitable for producing film and sheet with melt-processable materials such as PE, PP, PS, ABS, PVC, PET, PC, etc. as well as filled materials.
- Materials must be approved by the faculty in charge.
Standard Operating Procedure
Questions & Troubleshooting
Process Library