2024-12-20 to 2025-01-02: Reduced Holiday Operations

Dear Birck Research Community,

The Purdue winter recess begins effective Friday afternoon December 20th and concludes Thursday morning, January 2. The university is officially closed during this time. As we have done in past years, the Birck Nanotechnology Center will remain available for research but will be unstaffed and hazardous gasses will be unavailable. Lab work may otherwise proceed, though any fume hood work must be done with someone else present in the same laboratory or cleanroom bay (the "buddy" system). Click the link above to get more detail about equipment conditions and rules.

Refer to the Material and Process Compatibility page for information on materials compatible with this tool.
Equipment Status: Set as UP, PROBLEM, or DOWN, and report the issue date (MM/DD) and a brief description. Italicized fields will be filled in by BNC Staff in response to issues. See Problem Reporting Guide for more info.

Status	UP
Issue Date and Description
Estimated Fix Date and Comment
Responding Staff

/wiki/spaces/BNCWiki/pages/6236754

/wiki/spaces/BNCWiki/pages/6254010

iLab Name: C - Roll to Roll System (Clean room)
iLab Kiosk: BRK Roll to Roll Technology Core
FIC: Miko Cakmak
Owner: Guy Telesnicki
Location: Cleanroom - E Bay
Maximum Wafer Size: N/A

Overview

General Description

Specifications

Technology Overview

Special gowning protocols must be followed for E-Bay

Sample Requirements and Preparation

Standard Operating Procedure

Questions & Troubleshooting

Process Library

References

Maxwell Manual

Chapter	Topic	File
1	Safety	Maxwell_Manual_Ch1to5.pdf
2	General Description
3	Unwind Module
4	Doctor Blade
5	Electrospinning Cabinet
6	Extruder	Maxwell_Manual_Ch6to10.pdf
7	High Voltage Electric Field System
8	Heater Plates
9	Laser
10	Magnet
11	UV Lamp	Maxwell_Manual_Ch11to15.pdf
12	Ovens
13	Main Operator Panel
14	Belt Drive
15	Belt Trackers
16	Rewind Module	Maxwell_Manual_Ch16to22.pdf
17	Wiring Diagrams
18	Air and Gas Piping
19	Water Piping
20	Thread-Up Procedure
21	Overall Machine Dimensions
22	Notes
Addendum	Wiring diagram for Edge Guide Controllers (AutoCAD drawing)	EGMASTERSCHEM.dwg

In-line Measurement System References

Connection Diagram for In-line Measurement System Components:

Slot-Die Coating - manuals

Syringe Pump w/ Flow Rate Control: KDS Model 410 Series_5605-001REVH.pdf

Maxwell Roll to Roll System