/wiki/spaces/BNCWiki/pages/6236662

iLab Name: Fuji Inkjet
iLab Kiosk: BRK Roll to Roll Technology Core
FIC: Miko Cakmak
Owner: Guy Telesnicki
Location: BRK 1100A
Maximum Wafer Size: 

Overview

General Description

The DMP-2850 allows the deposition of fluidic materials on an 8"X11" substrate stilizing a disposable piezo inkjet cartridge. This printer can create and define patterns over an area of about 200 x 300 mm and handle substrates up to 25 mm thick with an adjustable Z height. The temperature of the vacuum platen, which secures the substrate in place, can be adjusted up to 60°C. The DMP-2850 offers a variety of patterns using a pattern editor program. Additionally, a waveform editor and a drop-watch camera system allows manipulation of the electronic pulses to the piezo jetting device for optimization of the drop characteristics as it is ejected from the nozzle. This system enables easy printing of structures and samples for process verification and prototype creation.

Specifications

• Material & fluid development and evaluation
• Prototype and sample generation
• Fluid and substrate interactions evaluation
• Product development
• Optimization and evaluation of digital patterns
• Deposition of biological fluids including cell patterning, DNA arrays, proteomics

Technology Overview 

Sample Requirements and Preparation

Standard Operating Procedure

Questions & Troubleshooting

Process Library

References