| Page Properties | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
|
| Page Properties | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
|
| Table of Content Zone | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
Overview
General Description
| Tip |
|---|
This is an example of a tip |
| Warning |
|---|
This is an example of a tool warning |
Specifications
Technology Overview - Remove if multiple tools use the same technology/processThe Nanoscribe Photonic Professional GT2 uses Two-Photon Polymerization (2PP) to produce filigree structures of nearly any 3D shape by high-precision 3D printing: crystal lattices, porous scaffolds, naturally inspired patterns, smooth contours, sharp edges, undercuts and bridges are all manufacturable with high resolution.The printer is capable of printing in Mesoscale, and all the way down to Nanoscale, and is designed around work in Microfluidics, Micromechanics, Micro optics, Photonics and plasmonics, Biomedical applications, and Nanostructures.
Specifications
| Printing technology | Layer-by-layer Two-Photon Polymerization |
| Minimum XY feature size | 160 nm typical; 200 nm specified* |
| Finest XY resolution | 400 nm typical; 500 nm specified* |
| Finest vertical resolution | 1,000 nm typical; 1,500 nm specified* |
| Layer distance | Variable, 0.1 – 5.0 µm* |
| Maximum object height | 8 mm* |
| Build volume | 100 × 100 × 8 mm³ * |
| Minimum surface roughness Ra | ≤ 20 nm* |
| Max. scan speed | From 100 to 625 mm/s* |
*Values may vary depending on the Solution Set, objective or resin in use
Technology Overview
Sample Requirements and Preparation
Standard Operating Procedure
| View file | ||||
|---|---|---|---|---|
|
Training video on 6/24/2021, (only available for Purdue users)
Questions & Troubleshooting
Process Library