Image Removed

iLab Name: ULS PLS6MW Laser Engraver
iLab Kiosk: BRK Packaging and Assembly Core
FIC: Shared
Owner: Mihailo Bradash
Location: BRK 2081
Maximum Wafer Size: N/A

Overview

General Description

Laser cutter used to cut materials into different shapes and sizes.

Specifications

PLS6MW MW laser cutter process the broadest possible spectrum of materials. The system is reconfigured with the standard 10.6 micron pre-aligned interchangeable CO₂ laser, the system can process plastics, textiles, wood and some metals.

System specifications:

• • Work area: 32 x 18 in.
  • Max part size: 37 x 23 x 9 in.
  • Dimensions: 44 x 39 x 36 in.
  • Rotary capacity: Max diam. 8 in. 2.0 lens.
  • Motorized Z axis lifting capacity: 40 lbs.
  • Available lenses: 2.0 in (51 mm), 4.0 in ( 101mm101.61mm), HDFO.
  • Laser platform interface panel: Keypad and LCD display shows current file name, laser power, engraving speed, PPI, and run time.
  • Cabinet style: Floor standing.
  • Laser: 10.6 mm um CO₂ at 10, 25, and 75 Watts; 9.3um CO₂ at 30, 40, 50, 60and 75 Watts; 1.06 um Fiber at 40, and 75 50 Watts.

Technology Overview

Sample Requirements and Preparation

Compatible materials:

Plastics, textiles, wood, and some metals

Non-Compatible materials:

Poly-carbonates, ABS plastic, Rubbers

Standard Operating Procedure

Questions & Troubleshooting

Why am I getting "Empty File: The printed document contains no data. " error?

Make sure red line is RGB hairline with your color management off. If the error continues contact the corresponding BNC staff.

Process Library

References