ULS PLS6MW Laser Engraver

Owned by Wirth, Justin C
Last updated: May 08, 2024
1 min read


Refer to the Material and Process Compatibility page for information on materials compatible with this tool.
Equipment Status: Set as UP, PROBLEM, or DOWN, and report the issue date (MM/DD) and a brief description. Italicized fields will be filled in by BNC Staff in response to issues. See Problem Reporting Guide for more info.

StatusUP
Issue Date and Description


Estimated Fix Date and Comment


Responding Staff

/wiki/spaces/BNCWiki/pages/6240138

iLab Name: ULS PLS6MW Laser Engraver
iLab Kiosk: BRK Packaging and Assembly Core
FIC: Shared
Owner: Mihailo Bradash
Location: BRK 2081
Maximum Wafer Size: N/A

Overview

General Description

Laser cutter used to cut materials into different shapes and sizes.

Specifications

PLS6MW MW laser cutter process the broadest possible spectrum of materials. The system is reconfigured with the standard 10.6 micron pre-aligned interchangeable CO2 laser, the system can process plastics, textiles, wood and some metals.

System specifications:

    • Work area: 32 x 18 in.
    • Max part size: 37 x 23 x 9 in.
    • Dimensions: 44 x 39 x 36 in.
    • Rotary capacity: Max diam. 8 in. 2.0 lens.
    • Motorized Z axis lifting capacity: 40 lbs.
    • Available lenses: 2.0 in (51 mm), 4.0 in ( 101.61mm), HDFO.
    • Laser platform interface panel: Keypad and LCD display shows current file name, laser power, engraving speed, PPI, and run time.
    • Cabinet style: Floor standing.
    • Laser: 10.6 um CO2 at 10, and 75 Watts; 9.3um CO2 at 30, 50, and 75 Watts; 1.06 um Fiber at 40, and 50 Watts.

Technology Overview

 

Sample Requirements and Preparation

Compatible materials:

Plastics, textiles, wood, and some metals


Non-Compatible materials:

Poly-carbonates, ABS plastic, Rubbers


Standard Operating Procedure


Questions & Troubleshooting

Why am I getting "Empty File: The printed document contains no data. " error?

Make sure red line is RGB hairline with your color management off. If the error continues contact the corresponding BNC staff.


Process Library

References