Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Current »

  1. Turn the Ion Gauge Controller OFF by pressing the button labeled |ON one time.
  2. Locate the Gate Valve handle, rotate the knob clockwise until the handle feels tight and locks into place.
  3. Locate the Vent valve knob, slowly rotate the knob counter clockwise until the knob stops.  
  4. Venting will take 2-3 minutes.  Venting is complete when a small gap forms between the bell jar and the base.
    1. Need an image of this...


  • No labels