Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

  1. From the main screen, press the menu button.
  2. Scroll down to film parameter, press menu
  3. Go to source screen, enter density and z-ratio for desired material
  4. Go to senso menu, enter tooling factor for desired material
  5. Scroll to the left press menu
  6. Scroll up to operate
  7. Press menu to return to main screen
  8. Turn on High Voltage switch on the power supply, wait 2 minutes.


  • No labels